swiss replica watchesreplica watches
80% of the replica watches uk market watch business, will be outsourced to replica watches Japan, Switzerland, several large factories to swiss replica watches produce. Today, Patek Philippe is the swiss replica watches only independent watch factory in Switzerland, the production line completely arranged their own. 20% use machine cutting, the rest of the eight is the use of hand.
Yukon-Eagle • View topic - Mike with his manometer video setting draft speed
Page 1 of 1

Mike with his manometer video setting draft speed

PostPosted: Wed Dec 15, 2010 3:17 pm
by Keith Nelson

Re: Mike with his manometer video setting draft speed

PostPosted: Wed Feb 23, 2011 9:58 pm
by BamBam0099
I watched the video and it was nicely done but Mike could not get the manometer "set right" because he was trying to set it to -0.3 when the manual clearly states 0.3 on page 45. Someone that knows Mike might want to let him know this...

Re: Mike with his manometer video setting draft speed

PostPosted: Thu Feb 24, 2011 1:50 pm
by Keith Nelson
>o3" of WCis actually a negative number ...all drafts are.

Re: Mike with his manometer video setting draft speed

PostPosted: Thu May 19, 2011 12:34 am
by ldomash
Thanks .. but not such a good answer .. I was looking for feedback from somebody who doesn't work for Yukon-Eagle

Re: Mike with his manometer video setting draft speed

PostPosted: Fri May 27, 2011 2:15 pm
by northfriend
I do not work for Yukon. The Manometer has two ports where you can hook your flexible plastic tubing. If you hook to one port, your flue draft will pull air, so the oil in the manomater registers downward movement. So set the manometer at +0.3, and draw it down to 0.0, Hook the tubing to the other port, and the flue draft registers positive movement on the oil. Set the meter to -0.3, and adjust to 0.0. It works either way, which to me, makes sense, and explains the video.